This NEMA 7 compressor control panel example is a redesign of our customer’s previous standard panel. It’s primary function is to control an Air Compressor on an explosion-proof equipment skid located on an offshore oil rig with a 600V power system.
We redesigned the panel to reduce skid production cost. We provide a tall narrow enclosure with components arranged to allow rear conduit entry. This allows our customer to locate it on the edge of their equipment skid to improve access to the compressor control panel.
Click here to see our Large Manufacturer Success Story
Engineering Submittal Package
We produce an engineering submittal package for every control panel we’re planning to produce. We submit to our customer for review and approval prior to releasing it to production. This allows everyone to review what we’re planning to produce and confirm that it’s correct. Each includes the following sections.
- Section A. Datasheets for Enclosures and Accessories
- Section B. Datasheets for Power and Control Devices
- Section C. Datasheets for Field Mounted Devices
- Section D. Drawings
- Section E. Bill of Material
Click here to see our Compressor Control Panel (NEMA7) Submittal
Specification Details
Specification | Description | Details |
---|---|---|
Safety Certification Label | None Requested | |
Enclosure Type | Wall Mount | |
Enclosure Material | Cast Aluminum | |
Enclosure Rating | NEMA 7 | |
Incoming Power Voltage | 575VAC 3 Phase | |
Incoming Power Connection | Power Distribution Block | Enclosure Penetration Provided |
Incoming Power Disconnect | None | |
Incoming Power Short Circuit Protection | Transformer and Fan Motor | Compressor Protected By Circuit Breaker Powering Panel. |
Outgoing Power Loads | 30 HP & 3 HP Motors | Enclosure penetration provided |
Motor Control | FVNR | Across the Line |
Control Power | 120VAC | |
Operator Controls | Control Power Light Stop Push-Pull Start Pushbutton High Temperature Light Overload Reset Hourmeter |
|
Field Connections | Temperature Switch Pressure Switch Unload Solenoid |
Enclosure penetration provided |